The new pre-lagged cylinder was first fitted with all the various bits and pieces needed to connect it up – new hard-water suitable immersion heater went in first: Followed by a specialised Salamander S-Flange for the domestic hot water take off & dedicated air-free supply to a pumped power shower, yet to be purchased or…

With the subfloor up to spec, next stop was to cut & lay the new plywood flooring ready for test fitting of the new shower tray etc. With the plywood floor down, the new shower tray was manoeuvred into position and placed on the fllor. All somewhat easier said than done as this is a…

Just in time for our planned moving in date, and after many late nights the first bathroom was finally completed & declared ready for use. Sink/Loo units (minus seat & a post-installation cleanup) Installed shower head & screen Shower! What isn’t pictured here is the plumbing installation needed in the loft – working in conjunction…

The day has finally arrived…. Our new kitchen is in the building – in bits though! The new room is nearly ready to have the bits fitted and with luck, will acquire floor tiles & necessary plumbing tomorrow with the kitchen going in next week. All building work has now been completed; walls & ceiling…

Here’s the finished product. Still very much a Land Rover but now carrying around distinctly less land!!

Haven’t posted for a while (been somewhat busy!) so thought I’d share this briefly as a guide. We’ve been putting the finishing touches to a bedroom, and finally reached the point of needing to fit a new radiator. On the basis that it’s currently rather cold I didn’t really want to drain down the system……